Ask a question about this product...

Interior latex paint, may be use in exterior only under moderate conditions. 

• Good Coverage.
• Easy to apply .
• Fast Dry.
• Clean with Water.
• Affordable.
• Meldew Resistant

• Solids per Weight: 37.06 %
• Sólids per Volume: 20.0 %
• Coverage: 29.8 m2/ US gal a 1 mil de película seca
• Viscosity: 95 -100 KU
• Weight per Galon: 10.6 pounds
• Drying time (25 °C, 50 % H.R.):
• To touch: 30 - 40 minuts
• Rocoat: 2 horas 
• Clean with: water
• Dilute with: water 

  PRODUCT PREPARATION

  Dilution ratio 1:8. Shake it before use it. Do not mix it with other products.

The surface must be dry and clean, without dust, oil, rust or other elements that might interfere with the adherence or performance of the product. 

If necessary fix any surface imperfection before applying the paint. If the surface is new let it dry for at least 30 days before applying the paint. 

If the surface has already been painted, it is necessary to make an adherence test. In case that the surface is painted with enamel, it must be sanded to completely eliminate de shimmer of the coat and get good adherence. After sanding, clean the surface to eliminate the excess particles. 

If it is going to be used in metal surfaces, apply a primer first. 

• Can be applied with brush, roller, or spray gun.
• The area must be ventilate 
• Water resistant after 24 hours of application

Keep it in a fresh place, between 5°C and 38°C. When it has been opened and wanted to store it again add some water to avoid that the product dries, and close firmly.